Skip to Content

How to Stiffen Felt

I’m currently working on a project that requires the use of stiffened felt.  You can buy it already stiffened at the craft store, but then you are limited to the colors and sizes that they carry.  Also, if you know me, you know I am particular about what kind of felt I use.  It was surprisingly easy and cheap to stiffen the felt myself.  There are lots of different methods out there, but for my purposes, I found using regular old white school glue worked great!  So here you go, here’s how to stiffen felt with school glue.

Cutesy Crafts: How to stiffen felt with white school glue!

To stiffen felt, you will need:

  • felt
  • white school glue
  • warm water
  • old container
  • wax paper
  • iron and ironing board

How to Stiffen Felt with Glue

Mix approximately one part school glue to three parts warm water.  I am too lazy to measure when it comes to this sort of thing, so really I just dumped some glue into my bowl and added some warm water.  Make sure to mix it until it’s mostly smooth.  You don’t want the chunks of glue sticking to your felt.

Cutesy Crafts: How to stiffen felt with white school glue!

Cut your pieces of felt slightly larger than you need them to be.  The felt will shrink up a bit and warp as it dries.  For this reason I also recommend cutting out any shapes AFTER stiffening.  Submerge your felt in the mixture and make sure the whole piece gets nice and soaked.  If you are doing multiple colors, start with the lightest, as the dyes will bleed.

Cutesy Crafts: How to stiffen felt with white school glue!

Remove your felt and gently wring it out over your bowl.  Don’t twist or pull it.  A nice squeeze to get out the extra moisture is all you need.  It will still be a little wet, but you want to get out as much water as you can to speed up the drying process.

Cutesy Crafts: How to stiffen felt with white school glue!

Lay your felt on wax paper and smooth it out flat.  Don’t worry that it’s wrinkled from wringing it out, we will fix that later.  Let it dry completely.  We have lovely 100 degree weather right now, so I took mine outside to dry faster.  At least the heat is good for something!  Drying will take probably a day or two depending on how warm the environment is.

Cutesy Crafts: How to stiffen felt with white school glue!

Once your felt has dried completely, it should be nice and stiff.  Now is that part where we take care of the wrinkles.  Just sandwich it between two cloths and iron.  It will come out perfect and ready for your craft project!  (If you are using acrylic or polyester felt, just try not to leave the iron on there too long.  That stuff is made out of plastic.)

Cutesy Crafts: How to stiffen felt with white school glue!

Stiffened felt will show every hole that you put in it with a pin.  I recommend taping any patterns that you use instead of pinning.  Hope you enjoyed learning how to stiffen felt! Click here to see what I made with it and check out all of my felt crafts for more inspiration.

How to stiffen felt using white school glue.

You’ll Also Like:

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Nicole kennedy

Saturday 18th of November 2023

The ginger bread house is fantastic, I managed to make one. I really enjoyed making it. Xx

Duane Tarpey

Sunday 26th of February 2023

Thank you for new ideas

Viviana Suntaxi

Thursday 11th of November 2021

Hey could you tell me please if I can wash a quiet book made of stiffen felt?

Jessica @ Cutesy Crafts

Tuesday 30th of November 2021

No, I wouldn't. I would spot clean only.

Áurea formorso

Saturday 23rd of October 2021

Thank you!!!

Anndrea

Thursday 2nd of September 2021

Me encanta fieltro

This site uses Akismet to reduce spam. Learn how your comment data is processed.